In the winter, concrete repair in Colorado Springs, CO can be an issue due to freezing temperatures. This is due to a lack of adequate concrete layers that keep the concrete from freezing while it is still in use. You should hire concrete lifting services in Colorado spring. Companies should be prepared for the concrete leveling and lifting problems that can occur even after the concrete has been laid.

For concrete repair there are several benefits to using high-volume polyurethane concrete leveling systems than other concrete leveling techniques. They are:

· Cheaper.

· More accurate.

· Better moisture resistance.

Weather Temperature Role in Foundation Repair


Foundation repair can be a complicated process due to the large number of slopes and hills located in this metropolitan area. For this reason, concrete repair should be completed in the winter. Drastic weather changes during the winter months make a concrete repair difficult.

According to experts, at the end of May through early June, temperatures in the city can reach up to 32 degrees Fahrenheit. Temperatures will usually decrease during the cooler season of the year. But when it’s hot outside, you can expect the temperature to rise. In the middle of September through November, temperatures can reach up to nine degrees above the norm.

Crucial Steps:

Before the repair is completed, your contractor will require several crucial steps.

1. First, they will need to clear away any debris lying on the ground including sticks, rocks, tires, or anything else that might have damaged the asphalt.

2. Second, they will need to prepare the area for further activity. Lawnmowers, snowblowers, or any other equipment that might be used to work on your driveway will need to be stored in an accessible place until the repair is complete.

3. And last, but not least, a temporary repair project tentatively fixed to the concrete will need to be erected to ensure the site is safe.

Prepare the Area


To repair a concrete sloped surface, you will first need to prepare the area. The contractor will need to remove any loose soil to create a firm base for the concrete repair. Soil that is too loose will settle and form unevenly, which will be problematic during concrete installation. Once the soil is properly prepared, the contractor will then begin excavating the area.

The excavated area should be between one and three feet below the surface. This will allow the contractor to be able to properly pour the concrete mix while avoiding concrete lumps and eliminating the risk of damaging the newly installed concrete.

Remove the Excess Dirt and Fill It

Once the excavated area has been cleared, the contractor will then need to remove the excess dirt and fill it back in. Once this is completed, the contractor will then be able to determine if the newly poured concrete needs to be mixed with an additional base material to create a firm, level foundation. If concrete is to be reinforced, it will have to be reinforced with a concrete mix that was specifically designed to be used as a concrete fix.

The contractor will know how much foundation mix to use based on the existing soil conditions and the weight and volume of the concrete. Once the concrete is reinforced, the contractor will then pour the concrete.

Concrete Repair And Foundation Problems


Concrete repair is the principal thing to do away with foundation problems. Before attempting a concrete repair, it is essential to check what is the cause for the deterioration of the concrete, so that the most effective remedy can be implemented. There are several methods in which the concrete repair works:

Method Of Dry-Packing

The foundation of your building might crumble if the concrete develops holes. The dry-pack method is used to fill these gaps or holes that have emerged in your newly laid concrete.

The method includes forming a mixture with one part of cement, 2 and a half parts of sand and water. The consistency has to be balanced by adding the required amount of water.

Once a mortar is formed with the perfect consistency, all you need is to apply it directly to the holes in thin layers. The mortar dries on coming in contact with air and thereby, the holes are sealed.

The Concrete Replacement Method


When the damage is more intense and involves a crack as long as a square foot and about 6 inches deep, the simple dry-pack method can not give a fruitful result to it. In that case, you need a concrete repairing engineer who can implement the concrete replacement method to heal the disease.

It is a scientific process of concrete repairing in which the defective concrete is straight away picked off from the structural member. The area is then prepared for concrete repair.

Bond Coat Method For Replacing Unformed Concrete

Unformed concrete technically means the upper face of the floor. Deterioration of this unformed concrete is not uncommon to us, and this too in the long run can cause serious problems to the building.

The repair of the unformed concrete is done with the help of a bond coat. It is a mixture of sand and cement taken in equal proportion and mixed with water to reach a whipped cream-like consistency.

To prevent the drying away of the mixture, it has to be applied immediately before the concrete placement method. You can get a better result if the mixture is made of latex emulsions with portland cement and epoxy resins.

Preplaced Aggregate Concrete


Underwater damages of piers are the ones that cause massive damage to your building. The technique of preplaced aggregate concrete is what you need in this regard.

This is a four-step process that involves removing damaged concrete, section formation for repair, filling the area with aggregates, and finally, using mortar to seal the gap.

Use Of Synthetic Patches

The latest concrete repair techniques make use of synthetic materials to give you a more effective result. The use of epoxy resins has been familiarised these days and they have a superior bonding capacity than traditional mortars.

The mortar is applied immediately after the epoxy resins are first brushed on the base. It is then raised to the level of the area surrounding it.

Summing It Up

This repair is an essential thing to maintain the structure, stability, and look of your building. As different diseases have different cures, different concrete problems too have different repairing techniques. Thus understanding well what the matter is and choosing the proper repair before it’s too late is essential. Ensure a long life for your houses by selecting an effective concrete repair.